Setting Up Your First Spanking Machine: Step-by-Step

Unboxing and inventory

Open the box on a clean, flat surface. The Spankmachine X1 ships with the main body, the impact arm, three default attachments, a remote control, the power adapter for your region, and a printed quick-start card. Verify all items before you discard packaging.

Choose a location

Pick a location with a stable surface large enough for the base, plus room for the receiver. A bedroom, dungeon space or any room with a lockable door works. Keep it within reach of a power outlet — extension cords are fine if rated for the machine's wattage.

Assemble the arm and attachment

Slide the arm into the receiver socket and tighten the locking ring by hand. Do not use tools. Snap your chosen attachment onto the arm head — it should click. Tug gently to confirm it is seated.

For your first session use the softest attachment you have. You can always escalate.

Set height and angle

Height should match the centre of the receiver's buttocks when they are in their planned position — kneeling, bending over, or strapped to a bench. Angle the arm so the impact lands flat, not glancing. A glancing strike stings disproportionately.

Pair the remote

Press and hold the pairing button on both the machine and remote until the LED flashes. Most modern machines pair in under five seconds. Test all speeds before the receiver gets into position.

In summary

Setup is mostly about taking your time on the first run. After your second session you will assemble in under two minutes. Keep the printed quick-start card with the machine — it is the single best reference when you forget which knob does what.